This tutorial shows how the half etch detail is added in QCAD and the areas are filled.
Recent Posts
Pathfinder Project13/04/2018It’s not often that I post to the digressions area, mainly because I try to focus on the modelling but also there is personal aspect to the digressions and by its very definition it’s personal...
Steel coupling rods – Midland 3F10/02/2018We all seem to have our own little pet peeves in model making, one of mine is valve gear. Many years ago I was lucky enough to examine a couple of O’Gauge live steam loco’s...
M7 Railmotor update.24/12/2017A progress update for the LNWR M7 Railmotor. Now that I was happy with the shape of the roof for the railmotor it was trimmed to length and soldered on, This required a little care...
Tender body – Midland 3F13/11/2017With the rolling chassis complete attention was turned to making up the tender body. The main tender body is a resin casting, the original casting supplied in the kit was the wrong one, a small 2500 gallon...
Tender beginnings – Midland 3F03/10/2017Table of Contents Dummy Side FramesReplacement Inner ChassisBuilding the chassisReplacement brakesRolling Tender Chassis This series of posts is intended to document the build of a Midland 3F loco and tender as supplied by JLTRT. It...
Leave a Reply